Post by starkindler on May 20, 2003 17:48:50 GMT -5
here's a fix for CF network card issues that is posted on PPX.com. It was posted by Technofox (insert thanks to Techno fox here.. 
the fix:
QUOTE
Here is the fix for those of you who are having problems with using any type of compact flash nic cards, including wireless. After installing the driver (don't turn off your BE-300 or reboot it after driver installation or you will be starting from scratch),
Copy these file names from the \Windows directory
le100.dll (It seems to be a standard name regardless of manufacturer, but don't go by this rule of thumb)
arp.dll
network.cpl
to
nand\windows\
And that will fix most 10/100 CF issues.
For wireless copy files from \Windows
we11.dll (this might be named differently on other nics, mine is linksys)
arp.dll
network.cpl
to
nand\windows
As you can tell it's only three files, if you have both wireless and cable based nics, then copy the last 2 files and both driver.dlls to \nand\windows
ex:
\nand\windows\
arp.dll
network.cpl
le100.dll <--RJ45 nic
we11.dll <--Wireless nic
END QUOTE
the fix:
QUOTE
Here is the fix for those of you who are having problems with using any type of compact flash nic cards, including wireless. After installing the driver (don't turn off your BE-300 or reboot it after driver installation or you will be starting from scratch),
Copy these file names from the \Windows directory
le100.dll (It seems to be a standard name regardless of manufacturer, but don't go by this rule of thumb)
arp.dll
network.cpl
to
nand\windows\
And that will fix most 10/100 CF issues.
For wireless copy files from \Windows
we11.dll (this might be named differently on other nics, mine is linksys)
arp.dll
network.cpl
to
nand\windows
As you can tell it's only three files, if you have both wireless and cable based nics, then copy the last 2 files and both driver.dlls to \nand\windows
ex:
\nand\windows\
arp.dll
network.cpl
le100.dll <--RJ45 nic
we11.dll <--Wireless nic
END QUOTE